Initial mechanical ventilation settings: Difference between revisions

No edit summary
No edit summary
(55 intermediate revisions by 7 users not shown)
Line 1: Line 1:
== Initial ==
{{Adult top}} [[initial mechanical ventilation settings (peds)]].''
==Overview==
{{Initial ventilation settings table}}
 
==Traditional==
*FiO2 100% (1.0) and ween down  
*FiO2 100% (1.0) and ween down  
*Rate 8-12/min
*Rate 8-12/min
**consider 5-6 for asthma w/ permissive hypercapnea
**consider 5-6 for asthma with permissive hypercapnea
*[[Ventilation (Main)|Mode]]  
*[[Ventilation (Main)|Mode]]  
**A/C = default (most)  
**A/C = default (most)  
Line 8: Line 12:
**PC = with intact respiratory effort and non-severe respiratory failure (prefered in chronic vent)  
**PC = with intact respiratory effort and non-severe respiratory failure (prefered in chronic vent)  
*PEEP 0-5 mmH20  
*PEEP 0-5 mmH20  
*TV 5-8 cc/kg (eg. 500-600cc)  
*Tidal volume: 5-8 cc/kg (eg. 500-600cc)  
**(adjust to plateau pressure <35 cmH20)  
**(adjust to plateau pressure <35 cmH20)  
*I/E 1:2  
*I/E 1:2  
*PS (pressure support) 5-8cm to overcome endotracheal tube
*Pressure support: 5-8cm to overcome endotracheal tube


{{Initial ventilation settings table}}
==Lung Protective Strategy==
 
===Background===
== Lung Injury Strategy ==
*Focuses on low-tidal volume ventilation to reduce ventilator-associated lung injury (e.g. barotrauma and volutrauma worsening/causing [[ARDS]])<ref>Weingart SD. Managing Initial Mechanical Ventilation in the Emergency Department. Ann Emerg Med. 2016;68:614-617</ref>
=== Background ===
*Indicated for all intubated patients who do not have obstructive lung disease ([[COPD]], [[asthma]])<ref>Weingart SD. Managing Initial Mechanical Ventilation in the Emergency Department. Ann Emerg Med. 2016;68:614-617</ref>
*Ok for all pts except for obstructed
=== Settings ===
*1. Mode
**Assist control Volume
 
*2. Tidal Volume (lung protection)
**Start 6-8cc/kg predicted body wt
***Predicted body weight is used because a persons lung parenchyma does not increase in size as the person gains more weight.
***Titrate down if peak pressure >30
 
*3. Inspiratory Flow Rate (comfort)
**More comfortable if higher rather than lower
**Start at 60-80 LPM
 
*4. Respiratory Rate (CO2)
**Avg pt on ventilator requires 120mL/kg/min for eucapnia
**Start 16-18 breaths/min
**Maintain pH = 7.30-7.45
 
*5. FiO2/PEEP (O2)
**Move in tandem to achieve:
***SpO2 BETWEEN 88-95%
***PaO2 BETWEEN 55-80


{| class="wikitable"
{{Lung Protective Ventilator Settings}}
|-
{{Lung Protective FiO2 and PEEP Scale}}
| FiO2
| 0.3
| 0.4
| 0.4
| 0.5
| 0.5
| 0.6
| 0.7
| 0.7
| 0.7
| 0.8
| 0.9
| 0.9
| 0.9
| 1.0
| 1.0
| 1.0
|-
| PEEP
| 5
| 5
| 8
| 8
| 10
| 10
| 10
| 12
| 14
| 14
| 14
| 16
| 18
| 20
| 22
| 24
|}


==Obstruction Strategy==
==Obstruction Strategy==
===Background===
===Background===
Goal = Adequate time for expiration
*For patients with active bronchoconstriction (e.g. [[COPD]], [[asthma]])
*The best ventilatory strategy for these patients is to avoid intubation if possible; mechanical ventilation will often make the pulmonary situation worse, rather than better.<ref>Weingart SD. Managing Initial Mechanical Ventilation in the Emergency Department. Ann Emerg Med. 2016;68:614-617</ref>
*Goal = adequate time for expiration
*Frequently requires deep sedation and analgesia (first-line); may required paralysis (second-line)<ref>Weingart SD. Managing Initial Mechanical Ventilation in the Emergency Department. Ann Emerg Med. 2016;68:614-617</ref>
 
===Settings===
===Settings===
*1. Mode
#Mode
**Assist Control Volume
#*Volume-assist control
#Tidal Volume
#*Vt = 6-8 cc/kg of Ideal Body Weight
#**Ideal Body Weight used because lung parenchyma does not increase in size as the person gains more weight
#Inspiratory Flow Rate
#*60-80 L/minute
#**Some advocate for higher rates (e.g. 80-100 LPM) to allow more expiration time, however this will increase the peak pressures and has not shown to produce any clinically meaningful change in the expiration time<ref>Weingart SD. Managing Initial Mechanical Ventilation in the Emergency Department. Ann Emerg Med. 2016;68:614-617</ref><ref>Leatherman JW, McArthur C, Shapiro RS. Effect of prolongation of expiratory time on dynamic hyperinflation in mechanically ventilated patients with severe asthma. Crit Care Med. 2004;32:1542-1545.</ref>
#FiO2/PEEP
#*Titrate FiO2 to desired SpO2
#*Set PEEP 0-5
#Respiratory Rate
#*Set low - 10 BPM
#*Adjust for I:E 1:4 or 1:5
#*Permissive hypercapnia to avoid breath stacking
#**Ok as long as pH > 7.00-7.10
#**Maintain plateau pressure <30<ref>20. Oddo M, Feihl F, Schaller MD, Perret C. Management of mechanical ventilation in acute severe asthma: practical aspects. Intensive Care Med. 2006; 32(4):501-510.</ref>
#***If >30 go down on rate


*2. Tidal Volume
==Hypovolemic==
**Vt = 8 cc/kg predicted body wt
*Consider reducing PEEP to maintain adequate preload and prevent/minimize hypotension


*3. Inspiratory Flow Rate
==Miscellaneous==
**Set at 80-100 LPM to allow more expiration time
''Normally already set''
 
*Inspiratory flow rate = 60L/min<ref>Weingart SD. Managing Initial Mechanical Ventilation in the Emergency Department. Ann Emerg Med. 2016;68:614-617</ref> (100 L/min with asthma)  
*4. FiO2/PEEP
**Titrate FiO2 to desired SpO2
**Set PEEP 0-4
 
*5. Respiratory Rate
**Set low - 10 BPM
**Adjust for I:E 1:4 or 1:5
**Permissive hypercapnia to avoid breath stacking
***Ok as long as pH > 7.00-7.10
***Maintain plateau pressure <30<ref>20. Oddo M , Feihl F , Schaller MD , Perret C . Management of mechanical  ventilation in acute severe asthma: practical aspects . Intensive Care  Med . 2006 ; 32 ( 4 ): 501 - 510 .</ref>
****If >30 go down on rate
 
==Making Setting Changes ==
=== O2 ===
*PaO2 (ween to SaO2 >90% and PaO2 >60)
*FiO2 (ween to <0.5 if poss)
*PEEP (see ARDS schedule; if >10, should have arterial line)
**(rule of 7s: decrease 1 FiO2 = 7 pO2)
 
=== CO2 ===
*PCO2
**TV
**Rate
*(VE-1 x pCO2-1 = VE-2 x pCO2-2)
**VE = minute ventilation (RR x TV)
 
=== pH ===
to increase pH 0.01 --> decrease pCO2 by 1
 
== MISC (normally already set) ==
 
*Inspiratory flow rate = 60L/min (100L/min with asthma)  
*Sensitivity = 1-2 cmH2O
*Sensitivity = 1-2 cmH2O


== See Also ==
==See Also==
{{Mechanical ventilation pages}}
{{Mechanical ventilation pages}}
 
*[[Ideal_body_weight_estimation|Ideal Body Weight Estimation]]
==References==
==References==
<references/>
<references/>


[[Category:Critical Care]]  
[[Category:Critical Care]]  
[[Category:Pulm]]
[[Category:Pulmonary]]

Revision as of 16:18, 2 July 2020

This page is for adult patients. For pediatric patients, see: initial mechanical ventilation settings (peds).

Overview

Initial ventilation settings

Disease Tidal Volume (mL/kg^) Respiratory Rate I:E PEEP FiO2
Traditional 8 10-12 1:2 5 100%
Lung Protective (e.g. ARDS) 6 12-20 1:2 2-15 100%
Obstructive (e.g. bronchoconstriction) 6 5-8 1:4 0-5 100%
Hypovolemic 8 10-12 1:2 0-5 100%

^Ideal body weight

Traditional

  • FiO2 100% (1.0) and ween down
  • Rate 8-12/min
    • consider 5-6 for asthma with permissive hypercapnea
  • Mode
    • A/C = default (most)
    • SIMV = with obstructive airway disease and an intact respiratory effort (e.g. some COPD, asthma)
    • PC = with intact respiratory effort and non-severe respiratory failure (prefered in chronic vent)
  • PEEP 0-5 mmH20
  • Tidal volume: 5-8 cc/kg (eg. 500-600cc)
    • (adjust to plateau pressure <35 cmH20)
  • I/E 1:2
  • Pressure support: 5-8cm to overcome endotracheal tube

Lung Protective Strategy

Background

  • Focuses on low-tidal volume ventilation to reduce ventilator-associated lung injury (e.g. barotrauma and volutrauma worsening/causing ARDS)[1]
  • Indicated for all intubated patients who do not have obstructive lung disease (COPD, asthma)[2]

Lung Protective Mechanical Ventilation

Lung Protective Ventilator Settings[3] should be the default for all intubated patients, unless contraindicated. It has demonstrated mortality benefit for ARDS-like pulmonary conditions; limits barotrauma and decreases complications of high FiO2[4][5]

  1. Mode
    • Volume-assist control
  2. Tidal Volume
    • Start 6-8cc/kg predicted body weight[6]
      • Predicted/"ideal" body weight is used because a person's lung parenchyma does not increase in size as the person gains more weight.
    • Titrate down if plateau pressure >30 mmHg
  3. Inspiratory Flow Rate (comfort)
    • More comfortable if higher rather than lower
    • Start at 60-80 LPM
  4. Respiratory Rate (titrate for ventilation)
    • Average patient on ventilator requires 120mL/kg/min for eucapnia
    • Start 16-18 breaths/min
    • Maintain pH = 7.30-7.45
  5. FiO2/PEEP (titrate for oxygenation)
    • Move in tandem to achieve:
    • SpO2 BETWEEN 88-95%
    • PaO2 BETWEEN 55-80mmHg

Lung Protective FiO2 and PEEP Scale[7][8][9]

FiO2 0.3 0.4 0.4 0.5 0.5 0.6 0.7 0.7 0.7 0.8 0.9 0.9 0.9 1.0 1.0 1.0
PEEP 5 5 8 8 10 10 10 12 14 14 14 16 18 20 22 24

Obstruction Strategy

Background

  • For patients with active bronchoconstriction (e.g. COPD, asthma)
  • The best ventilatory strategy for these patients is to avoid intubation if possible; mechanical ventilation will often make the pulmonary situation worse, rather than better.[10]
  • Goal = adequate time for expiration
  • Frequently requires deep sedation and analgesia (first-line); may required paralysis (second-line)[11]

Settings

  1. Mode
    • Volume-assist control
  2. Tidal Volume
    • Vt = 6-8 cc/kg of Ideal Body Weight
      • Ideal Body Weight used because lung parenchyma does not increase in size as the person gains more weight
  3. Inspiratory Flow Rate
    • 60-80 L/minute
      • Some advocate for higher rates (e.g. 80-100 LPM) to allow more expiration time, however this will increase the peak pressures and has not shown to produce any clinically meaningful change in the expiration time[12][13]
  4. FiO2/PEEP
    • Titrate FiO2 to desired SpO2
    • Set PEEP 0-5
  5. Respiratory Rate
    • Set low - 10 BPM
    • Adjust for I:E 1:4 or 1:5
    • Permissive hypercapnia to avoid breath stacking
      • Ok as long as pH > 7.00-7.10
      • Maintain plateau pressure <30[14]
        • If >30 go down on rate

Hypovolemic

  • Consider reducing PEEP to maintain adequate preload and prevent/minimize hypotension

Miscellaneous

Normally already set

  • Inspiratory flow rate = 60L/min[15] (100 L/min with asthma)
  • Sensitivity = 1-2 cmH2O

See Also

Mechanical Ventilation Pages

References

  1. Weingart SD. Managing Initial Mechanical Ventilation in the Emergency Department. Ann Emerg Med. 2016;68:614-617
  2. Weingart SD. Managing Initial Mechanical Ventilation in the Emergency Department. Ann Emerg Med. 2016;68:614-617
  3. The Acute Respiratory Distress Syndrome Network. Ventilation with lower tidal volumes as compared with traditional tidal volumes for acute lung injury and the acute respiratory distress syndrome. The Acute Respiratory Distress Syndrome Network. N Engl J Med. 2000;342(18):1301-1308.
  4. ARDSnet
  5. O'Brien J. Absorption Atelectasis: Incidence and Clinical Implications. AANA Journal. June 2013. Vol. 81, No. 3.
  6. Brower RG, et al. "Ventilation With Lower Tidal Volumes As Compared With Traditional Tidal Volumes For Acute Lung Injury And The Acute Respiratory Distress Syndrome". The New England Journal of Medicine. 2000. 342(18):1301-1308.
  7. The Acute Respiratory Distress Syndrome Network. Ventilation with lower tidal volumes as compared with traditional tidal volumes for acute lung injury and the acute respiratory distress syndrome. The Acute Respiratory Distress Syndrome Network. N Engl J Med. 2000;342(18):1301-1308.
  8. Kallet RH, et al. "Respiratory controversies in the critical care setting. Do the NIH ARDS Clinical Trials Network PEEP/FIO2 tables provide the best evidence-based guide to balancing PEEP and FIO2 settings in adults?" Respiratory Care. 2007. 52(4):461-75.
  9. ARDSnet protocol card
  10. Weingart SD. Managing Initial Mechanical Ventilation in the Emergency Department. Ann Emerg Med. 2016;68:614-617
  11. Weingart SD. Managing Initial Mechanical Ventilation in the Emergency Department. Ann Emerg Med. 2016;68:614-617
  12. Weingart SD. Managing Initial Mechanical Ventilation in the Emergency Department. Ann Emerg Med. 2016;68:614-617
  13. Leatherman JW, McArthur C, Shapiro RS. Effect of prolongation of expiratory time on dynamic hyperinflation in mechanically ventilated patients with severe asthma. Crit Care Med. 2004;32:1542-1545.
  14. 20. Oddo M, Feihl F, Schaller MD, Perret C. Management of mechanical ventilation in acute severe asthma: practical aspects. Intensive Care Med. 2006; 32(4):501-510.
  15. Weingart SD. Managing Initial Mechanical Ventilation in the Emergency Department. Ann Emerg Med. 2016;68:614-617